jad Posted January 19, 2013 Posted January 19, 2013 Hi guys I am trying to find the lengths of 2 different bell housings for an adapter I need made. I have searched and found some answers but they all sound a bit too approximate for my liking! I need measurements for both an R380 V8 bell housing and a defender LT77 bell housing. The LT77 measurement must be to the mounting face and not the lip that fits into the flywheel housing. Does anyone have 1 or both of these sitting around that they could measure accurately for me? Thanks for your help Jad Quote
reb78 Posted January 19, 2013 Posted January 19, 2013 I could dig out a defender lt77 one later next week if noone else has managed it by then. Quote
jad Posted January 19, 2013 Author Posted January 19, 2013 Hiya Yeah that would be great if no one else does. Cheers James Quote
greenstream Posted January 20, 2013 Posted January 20, 2013 Hi James I've got the measurements from a LT77 V8 from a Defender and a R380 V8 from a Defender. LT77 V8 Defender : 30,6 cm. R380 V8 Defender : 27,6 cm. I dont know if it was the V8 or 4-pot Defender LT77 you asked for, but this is what I got right now. Morten Quote
jad Posted January 20, 2013 Author Posted January 20, 2013 Thanks morten thats brilliant. I needed the V8 r380 and defender diesel lt77 so hopefully somebody will be able to provide and accurate measurement for me. Thanks a lot Jad Quote
MECCANO Posted January 21, 2013 Posted January 21, 2013 Defender 4 pot lt77 is 148mm to lip. lip is 8mm Quote
jad Posted January 21, 2013 Author Posted January 21, 2013 Marvellous! Thank you very much Meccano. I think I now have everything I need! cheers Jad Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.