Made this on the CNC router

[richard93vogue]

Hello all,

My name is Richard and I am from Australia and am new to this forum. I have a 93 Classic Range Rover. Just thought I would share a picture of something I made up on the CNC router we have at my work. I traced the logo in Autocad and then cut it out. I plan on making a smaller one to fit to my Toylander (when I get it finished!)

Regards,

Richard.

[tacr2man]

Looks a lot like the belt buckle a Ozzie friend got me made in Thailand, from solid brass , dont think it was made on a cnc machine tho

[bishbosh]

Don't you just hate folk who have access to CNC machines at work? the most exciting thing in my office is an A0 plotter :(

Oh, and welcome to the forum Richard!

[vulcan bomber]

Don't you just hate folk who have access to CNC machines at work? the most exciting thing in my office is an A0 plotter :(

Oh, and welcome to the forum Richard!

Get yourself a round table and a dividing head.. Some math lessons and you can make it all without a CNC.

[richard93vogue]

Get yourself a round table and a dividing head.. Some math lessons and you can make it all without a CNC.

Yikes! I like to let the computer do the math thank you very much!

[CwazyWabbit]

There would certainly be quite a lot of calculations to make that badge

[TSD]

Coincidentally, digging around in the shed this afternoon, I found the first thing I ever made on my CNC mill, a few years back.

(You can tell it's the first, I hadn't figured out how to cut the oval properly - it's about 70mm across and all cut with a 3mm cutter)